DSC / DCell Identification

This Software title is licensed as FREEWARE. This means it is completely Free to use and can be copied and distributed freely as long as the following conditions are met:

The source files on the original media cannot be changed in any way and must be distributed in full including any soft documentation.
The software must not be packaged as an end user application. It must only be used as a configuration tool.
There must be no charge for the software itself, although a charge may be made for duplication and/or media.
Component software parts may not be used in third party applications without prior consent from the software author.

Version 1.5

This application will detect a DLC or DSC connected to a PC when the station number or the baudrate is unknown or has been inadvertently changed. You will need to know the protocol to save trying each type. Protocols are MantraBus, MantraASCII and ModBus.

Note: The device must be correctly connected to the PC serial port including an RS485 converter where required.

Warning: Detection will fail in cases where the device has been set to a higher baud rate than the PC serial port can acheive.Note: The device must be correctly connected to the PC serial port including an RS485 converter where required.